Below is a table of spare parts for the following models:
- E-DWT
- E-DWT-10000-AF
- MPG2 (Some E-DWT parts are used in the MPG2 (reservoir with priming pump, variable volume, valves)
E-DWT single Q-RPT model on left without low Q-RPT isolation valve
E-DWT dual Q-RPT model on right with low Q-RPT isolation valve
| Quantity | Part Number | Description |
| 4 | 3154424 | FOOT,BLK NITRILE,DIA 13.6 |
| 2 | 2090547 | HANDLE, POCKET PULL |
| 1 | 3150589 | BHD,SS,DH500F X HF2 (TEST port bulkhead fitting) |
| 1 | 3337108 | Reservoir assembly. Includes entire priming pump, lid, lid o-ring, reservoir vent valve, and reservoir body as a single assembled part as shown in first picture below. |
| 1 | 3338698 | ASSY,PUMP,PRIMING |
| 2 | 3135450 | Priming Pump o-ring, Viton, for use with mineral oil |
| 4 | 3329907 | Handle, Stainless Steel Shaft ,Phenolic Grip, Black |
| 6 | 3334530 | Priming Pump o-ring, EP, for use with Sebacate, alcohol or water |
| 1* | 5192630 | Power Supply, 36W, 90-264VAC, 12V@3A, w/ mains adapters and universal wall mount, External to E-DWT (need to order below adapter also). |
| 1* | 4808053 | Adapter connector, DC power, male/female |
| 1 | 3335955 | (402515) cable, internal, E-DWT back panel to RPM4 |
| 1** | 3622351 | KIT-E-DWT-PS-REPL,12V power supply & replacement internal power cable (includes power supply 5192630, adapter 4808053 & internal cable 3335955) |
| 1 | 3462475 | PK-E-DWT-FILL,LIQUID FILL KIT |
| 1 | 2493420 | (102496) Krytox® GPL205/6 High Temp Lubricant, 0.5 oz. tube |
| 2 | 3330735 | Reservoir and/or TEST shutoff valve (regular E-DWT, not -AF model) |
| 1 | 3330735 | Reservoir shutoff valve (-AF model) |
| 1 | 3328687 | TEST shutoff valve (-AF model) |
| 2 | 3337089 | Black knob assembly for reservoir or shutoff valves |
| 1 | 3337092 | Range Selection /Lo Q-RPT Isolation Valve - Complete assembly |
| 1 | 3150795 | Valve Seat for Range Selection /Lo Q-RPT Isolation Valve |
| - | 3154677 | SCREW,M3 X 6MM L,BUTTON HEAD SOCKET CAP SCREW,SS (side panel screws) |
| 3143178 | GLAND,SS,DH200-2,400M (for internal tube welds) | |
| 3143184 | CLR,SS,DH200-2,400M (for internal tube welds) | |
| 3071049 | BP-401904,BATTERY/CHARGER PACK |
Original power supply PN 3335610 and replacement 4766592 are no longer available. The current PN is 5192630. Note that adapter PN 4808053 CONNECTOR, POWER, DC PWR, JACK,2.1X5.5MM FEMALE TO 2.5X5.5MM MALE JACK is needed with PN 4766592. (01-February-2017)
** This kit includes power supply, adapter from power supply to back panel connector, and internal cable from back panel of E-DWT to RPM4. See instruction sheet that can be viewed/downloaded below that is named "Power Supply Replace Inst 3622296 with new PS noted.pdf"* Both are needed when replacing a power supply.
If you're looking for the internal power cable from the back panel of the E-DWT to the RPM4, that is PN 3335955. The original internal DC power cable was PN 3335962 (no longer available).
Purchase orders can be faxed to 1.425.446.5716 or emailed to orders@flukecal.com
Quotations and terms and conditions can be obtained from our Orders group at 1.877.355.3225 or orders@flukecal.com
See this article for replacing the fluid and some other general maintenance,
https://flukecorporation.zendesk.com/knowledge/articles/208140103
See this article for information on replacement display,
/en-US/hc/en-us/articles/203238060
See this article for information on replacement valve seat 3150795 for Low Q-RPT Isolation Valve, /en-US/hc/en-us/articles/205319850
Credit card orders can be made by phone by calling 1.877.355.3225