Views:

1. Turn the unit upside down and remove the back frame

mceclip1.png

2. Remove the storage compartment

mceclip2.png

3. Remove all 4 screws 

mceclip3.png

4. Remove the bracket

mceclip4.png

5. Turn the unit sidewise and remove the screw that holds the handle

mceclip5.png

6. Remove the screw from the opposite side

mceclip6.png

7. Remove handle

mceclip7.png

8. Remove all 4 screws that hold the panel

mceclip8.png

9. Remove panel

mceclip9.png

10. Remove nuts that hold all DWF connectors

mceclip10.png

11. Finish removing all nuts

mceclip11.png

12. Lift back panel and circuit board on an upright position

mceclip12.png

13. Finish removing the back panel and circuit board

mceclip13.png

14. Lift the panel up that houses all the DWF connectors

mceclip14.png

15. Select the channels where the DFW connectors need to be replaced
and put the unit back together again

mceclip15.png